DVR 8-CH Spezifikationen PDF herunterladen (Seite 94)

WPS-100-DVR-8CH Installation and Users Manual

 •GOTOPRESET

  DenethepresetPTZpositiontheFocusCamerawillgotoifthealarminputistriggered(thefocus

camera must be a PTZ camera for this feature). For more details about preset positions for PTZ

cameras, refer to Section 7.

 •PRE-RECORD

  DenehowmuchtimetheDVRwillrecordbeforethealarminputistriggered.ThePreRecordFPSset

in Section 9.3.5 determines the frame rate of this recording

Note: Actual pre-record time may be shorter than the value set if the total size of the pre-record video

exceeds the pre-record video buffer.

 •POST-RECORD

  DenehowmuchtimetheDVRwillrecordafterthealarminputistriggered.ThePostRecordFPSsetin

Section 9.3.5 determines the frame rate of this recording.

 •ALARMOUT

  DenewhichAlarmOutputwillbetriggeredwhenthealarminputistriggered.

 •BUZZER

By default, the internal buzzer is enabled to sound when the alarm input is triggered.

 •LOG

By default, the DVR will log when the alarm input is triggered to the event Log.

 •SCREENMESSAGE

By default, the DVR will display a message in the System Status Bar (visible from the VGA or BNC main

monitor output) when the alarm input is triggered.

 •E-MAIL

  Sendanemailmessagetoapredenedemailaddressintheeventthealarminputistriggered.The

default setting is disabled. See Section 9.3.11 for more information on e-mail.

 •FTP

This DVR can send the recorded video from the associated camera when an alarm input is triggered.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 114 115

Keine Kommentare

DVR 8-CH Spezifikationen Seite 94